eMotorsports Product 4

eMotorsoprts Used Parts

Stuff comes and goes from here.
Most of what we have for sale is the left over parts from projects.
Things I get as package deals that we don't need
Some times some of our R&D stuff will find its way here.
Or it could be stuff found in the back corners of the shop.

We will try to give an honest assessment of an items condition.
If we have tested it or know a bit of the history we will try to tell you.


Customized fuel rail for a 944 / 951. The stock FPR has been removed and a brass fitting brazed in its place. This allows for the use of a remote mount aftermarket fuel pressure regulator. I pressure tested this part to 175PSI. HOWEVER the bier shall be 100 percent responsible for testing and determining the applicability and risk associated with using this part. MAKE AN OFFER



Intercooler from a 951. Note the small dent on the bottom rear of the unit. Does not effect function but is visually noticeable MAKE AN OFFER





931 (924 turbo) nose panel decent shape see the photos as there are a couple of imperfections that will need to be addressed prior to painting but all in all a good piece. MAKE AN OFFER


VORTECH IGNITION BOOST CONTROL MADE BY MSD SAME AS UNIVERSAL BOOST TIMING MASTER PN 5462 MAKE AN OFFER

Porsche 924s / 944
PISTONS AND RODS FORM 1987 PORSCHE 2.5L 944 NA MOTOR NOTE THAT THE #2 ROD BEARING WAS SPUN AND THERE IS SCRATCHES ON THE SKIRTS ON SOME OF THE PISTONS. PISTONS HAD LESS THAN 10 HOURS RUN TIME WHEN FAILURE OCCURRED. MAKE AN OFFER




944 LEFT REAR / PASSENGER SIDE BUMPER GUARD. NOTE THAT THIS WILL NOT FIT ON A 924S. MAKE AN OFFER


3.8 Mustang Parts
1994 MUSTANG HEATER / AC CONTROLS MAKE AN OFFER
STARTER 1994 3.8-V6 MUSTANG MAKE AN OFFER
3.8 MUSTANG VORTECH PARTS
VORTECH AC COMPRESSOR RELOCATION BRACKETT COMPRESSOR AND IDLER PULLEY INCLUDED MAKE AN OFFER

MODIFIED AC COMPRESSOR LINE FOR VORTECH SUPER- CHARGER INSTALL ON 1994 MUSTANG 3.8 V6 MAKE AN OFFER

VORTECH SC BELT 1994 3.8 V6 MUSTANG MAKE AN OFFER
VORTECH V-2 SUPPER - CHARGER FOR PARTS OR REBUILD. UNIT IS NOT IN WORKING CONDITION. MAKE AN OFFER




NUTS AND BOLTS FROM VORTECH V-2 HEAD UNIT ABOVE MAKE AN OFFER
PULLEY FROM VORTECH V-2 UNIT ABOVE. STOCK 7-8PSI BOOST ON MUSTANG V6 3.8L MAKE AN OFFER
MOUNTING BRACKETT FROM VORTECH V-2 UNIT ABOVE FOR 1994 MUSTANG V6 MAKE AN OFFER
C5 Corvette
SMOG PUMP FOR C5 CORVETTE MAKE AN OFFER
SMOG PUMP FOR C5 CORVETTE MAKE AN OFFER
Misc Parts From Various Cars
ANTENNA NEW EXTENDS TO ABOUT 3' MAKE AN OFFER
DOME LIGHT FROM 1994 EXPLORER GREY TRIM MAKE AN OFFER
FORD CODE READER 81-95 ALL EXC 94-95 MUSTANG MAKE AN OFFER
FRAM AIR FILTER. FITS MERCURY VILLAGER MAKE AN OFFER
POWER - STEARING PUMP AND MISC PULLEY FROM MK1 MR2 MAKE AN OFFER


Got a comment about your experience here at eMotorsports.org? Drop us a note at: sales@emotorsports.org We will post them up!!!
SOLD
SOLD
~~931 (924 turbo) nose grills. Excellent shape nothing broken. Need a little soap and water to be like new.~~ SOLD


~~ALTERNATOR FROM 1994 MUSTANG 3.8 V6. WORKING ORDER WHEN I PUT IT ON THE SHELF. IF INTERESTED I WILL HAVE IT TESTED TO VERIFY THAT IT IS IN WORKING CONDITION~~. SOLD



~~BEGI FPR #2035 For Aftermarket Turbo and Supercharger.~~ ~~Completely adjustable. The best on the market! A must for a custom forced induction project.~~ SOLD

~~CRANKSHAFT~~ ~~TOAD NOT INCLUDED~~ ~~#3 BEARING WAS SPUN SO IT NEEDS TO BE TURNED DOWN~~ SOLD



TURBO COOLANT LINES Some Rust but still serviceable. From turbo above. SOLD
THERMOSTAT HOUSING Good used condition SOLD
SOLD
GASKETS & SEALS All are used. I don't know if they are re-usable. All are metal SOLD
COIL Only one appears to be good the others are broken. I have not tested this unit. Sold as is! SOLD
EXHAUST MANIFOLD Good Serviceable Condition SOLD
~~MISC. BRACKETS~~ SOLD
HEAT SHIELDS Some surface rust but in serviceable condition SOLD
~~OIL RETURN LINE~~ SOLD
EXHAUST LINE Note the damage to the flex section of the hose. SOLD
TURBO From the "Front" of the motor (by the Radiator). Turbo seems to be in excellent condition. No play in the shaft. Impellers turn smooth as silk. Unit appears to be in good serviceable condition. Tested with compressed air and spooled up with out issue. SOLD


CAT / DOWN PIPE No cracks. Brick looks to be in good shape. SOLD
TURBO From the "rear" of the motor (by the firewall). Turbo seems to be in excellent condition. No play in the shaft. Impellers turn smooth as silk. Unit appears to be in good serviceable condition. Tested with compressed air and spooled up with out issue. SOLD


~~HEADS~~ ~~A set of usable heads form a GTV3000/Dodge stealth Twin Turbo.~~ These should be torn down and cleaned up but could be bolted on "as is" if you absolutely had to get it running. I don't recommend this but sometimes necessity dictates. (I have been there) ~~There is a bit of rust on the valves on one of the cylinders. Could be cleaned up with a Dremel Tool.~~ ~~Cams look good and are included.~~ ~~No stripped bolts or studs. This is a good set of heads to send out and get rebuilt or tear them down do the porting and polishing and get that last bit of power.~~ ~~Valve covers and the cam position sensor are included.~~ ~~EBAY ADD CLICK HERE~~ SOLD




POWER TR UNIT Came from a running car should work but un tested ~~RELISTED~~ SOLD
~~ALTERNATOR FROM 1985 RX7~~ ~~WORKED WHEN REMOVED WILL HAVE TESTED IF INTERESTED~~ SOLD
~~OIL COOLER (#1) FROM 1986 (FC) RX7 WORKED WHEN REMOVED~~ SOLD
~~OIL COOLER (#2) FROM 1986 (FC) RX7 WORKED WHEN REMOVED~~ SOLD

~~OIL COOLER FITTINGS FROM 1986 (FC) RX7~~ SOLD

~~OIL COOLER LINES FROM 1986 (FC) RX7~~ SOLD

~~OIL COOLER MOUNTING HDW FROM 1986 (FC) RX7~~ SOLD
DOOR HINGES TEMP SENSOR AND ALT BRACKETT 1986 (FC) RX7 SOLD

~~2002-2006 TOYOTA CAMRY 6-CD CASSETTE A56820~~ SOLD